Mira 200 Mira 200
17
8.12.1. ENTERING A BABYCALL NUMBER
1. Press the line button and wait for the dial tone.
2. Press the set button (“SET” appears on the display).
3. Enter the code number 3719 (“SET BABYCALL” appears on the display).
4. Enter the desired telephone number.
5. Press the set button (“DONE” appears on the display).
6. Press the line button to stop the radio connection.
8.12.2. ACTIVATE BABYCALL
1. Press the line button and wait for the dial tone.
2. Press the set button (“SET” appears on the display).
3. First press the number “1” and then the button (“ “ appears on the dis-
play together with the programmed babycall number. The babycall function is
now activated and the handset is in standby mode).
The automatic dialling is done when you first press the line button and then
any button (except the set button ). You hear 2 short warning beeps to indi-
cate that the programmed babycall number is dialled automatically.
Important:
This function can only be activated if a babycall number has been programmed.
8.12.3. DEACTIVATE BABYCALL
1. Press the line button and wait for the dial tone.
2. Press the set button (“SET” appears on the display). The babycall number is
not dialled.
3. Press the number “1” and then the # button (“BABY OFF” appears short on the
display and then the handset is in standby mode).
16
8.11.1. ACTIVATE CALL BARRING
1. Press the line button and wait for the dial tone.
2. Press the set button (“SET” appears on the display).
3. First press the number “3” and then the button (first “LOCKED” appears on
the display and then, until the electronic lock is deactivated, “ “ is present on
the display).
4. Press the line button to stop the radio connection.
If you now first press the line button and then any other button, you will
hear a long warning tone to indicate that the electronic lock of the numerical but-
tons is activated.
Remark:
If the Mira 200 is connected to a house telephone exchange, incoming lines can
still be put through, even when the electronic lock is activated.
8.11.2. DEACTIVATE CALL BARRING
1. First press the line button and wait for the dial tone (“LOCKED “ appears
on the display).
2. Press the set button .
3. Press the number “3” and then the # button (“ “ disappears and now
“UNLOCK” appears on the display).
4. Press the line button .
8.12. BABYCALL (EMERGENCY CALL)
Thanks to the babycall function you can program the Mira 200 so that a prepro-
grammed telephone number is dialled when pressing any button.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals