Mira 200 Mira 200
11
· If the battery in the handset has not been charged for a long period of time,
charge it during an entire night.
· Do not throw faulty batteries just anywhere, they are small chemical waste
and have to be treated as such.
8. OPERA T I O N
8.1. OUT OF RANGE WARNING
Obstacles between the handset and the base station will influence the operation
range. When the handset is too far away from the base station, the quality of the
connection will deteriorate and you will hear a warning tone (2 signals). The
communication will be broken automatically if you do not go back into the
operation range within 10 seconds.
If a connection between the handset and the base station is not possible, you
will hear an intermittent warning tone.
8.2. TONE AND PULSE DIALLING
Standard the Mira 200 has been set to pulse dialling. It is possible that the
dialling system has to be changed to tone dialling (DTMF) before a call can be
made. Your telephone has to be set to the dialling system, which is offered on
your telephone line.
Pulse dialling : if you are connected to an older (mechanic) telephone exchange.
Tone dialling : if you are connected to a modern electronic (DTMF) telephone
exchange.
8.2.1. TEMPORARY PULSE -> TONE (DTMF) SWITCH
1. Press the line button and wait for the dial tone.
2. Press the set button (“SET” appears on the display).
10
7. BAT T E R Y
Open the cover of the battery compartment on the backside of the handset. Now
place the battery in the handset and put the ON/OFF-switch in the ON-position
(“I”).
The battery of the handset has to be charged before telephone calls can be
made. The first time the unit is used, it takes at least 10 hours before the battery
is fully charged.
Put the handset on the connected base station to charge the battery. The battery
indicator lights to indicate that the battery is being charged. After approximately
10 hours the battery is fully charged. Do not put the handset back in the base
station, every time the phone has been used! Put the handset only in its base
when it is indicated that the battery is almost empty. It is better for the battery
to be sufficiently decharged before being recharged.
Remark:
The battery indicator will light when the handset has been put on the base sta-
tion for charging. It will not turn off when the battery is fully charged.
When you hear an intermittent tone from the handset or when the low battery
indicator on the LCD display of the handset is blinking, the handset has to be
charged again.
A fully charged battery allows a conversation of 5 hours. In standby mode the
battery has to be recharged after approximately 30 hours .
Remarks:
· The charger contacts of the handset should not come into contact with metal
since this could cause a short-circuit and damage the battery irreparably.
· The charger contacts of the battery on the base station and on the handset
should be cleaned with a soft cloth once a month.
· If you do not use your unit for a longer period of time, remove the battery
from the handset or put the ON/OFF-switch of the handset in the OFF-posi-
tion. In this case, do not put the handset in charging position on the base sta-
tion. It is better for your batteries not to do so.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals