Topcom LUCCA Answering Machine User Manual download pdf (Page 25)

Lucca

“Alle Nachrichten gelöscht”. When all messages are erased they cannot be played

back again. Erasing cannot be undone.

7. REMOTE CONTROL

IMPORTANT

Remote control of your answering machine is only possible from a tone tele-

phone (with push buttons) or from a pulse telephone (with a tone dialer).

The tone dialer is available in option.

To get access to the remote control of your answering machine you first have to

enter a security code (see section “SETTINGS”). You can try six times to enter the

right security code, then the answering machine will break the connection. You

can switch off remote control by programming security code “000”.

SWITCHING ON THE ANSWERING MACHINE

BY REMOTE CONTROL

1. Dial your telephone number.

2. Your answering machine will answer your call after 10 rings.

3. After 2 seconds you will hear a continuous beep tone which lasts three

seconds.

4. Now enter the 3-digit security code within eight seconds.

5. Now press “8”. You will hear “Announcement one on”/“Ansage eins ein”

(answer mode with possibility to leave a message).

6. Press “9” to change the answer mode. You will hear: “Announcement two

on”/“Ansage zwei ein”.

7. You will hear a waiting signal and you have 10 seconds time to activate a new

feature.

8. Press “3” or hang up if you want to stop.

SWITCHING OFF THE ANSWERING MACHINE

BY REMOTE CONTROL

1. Dial your telephone number.

2. Your answering machine will answer your call after a few rings and emit the

outgoing message. Press # to stop OGM playback.

3. Enter your security code.

4. Press “8”. You will hear: “Answer off”/“Antwort aus”.

5 . You will hear a waiting signal and you have 10 seconds time to activate a

new feature.

6. Press “3” or hang up if you want to stop.

TOLL SAVER

If “Toll Saver” is not activated, the answering machine will answer calls after two

or four rings (depending on the position of the switch). Toll Saver allows you to

save telephone charges. If this feature is activated (switch at the side of your

machine), the machine will answer after 2 rings if you have received messages

and after 4 rings if you have no messages. In the latter case you can hang up

after 3 rings.

MESSAGE PLAYBACK BY REMOTE CONTROL

1. Dial your telephone number.

2. After a few rings your machine will answer your call and emit the OGM. Press

# to stop OGM playback.

3. Enter your security code.

4. As soon as you hear the waiting signal, press “1”.

5. The answering machine will first play back the memo messages followed by

the incoming messages. If you have new memo or incoming messages, only

these will be played back.

During playback:

a) Press “4” to play back the previous message again;

b) Press “5” to play back the message you have just heard;

c) Press “6” to play back the next message;

d) Press “0” to erase the message you have just heared. You will hear:

“Message erased”/“Nachricht gelöscht”;

e) Press “1” to introduce a pause. Within 10 seconds press “1” again to resume

message playback.

If all received messages together last longer than 2 minutes and 45 seconds, the

answering machine introduces automatically a pause during playback. You

can resume message playback by pressing “1”.

6. After all messages have been played back, you will hear: “End of

messages”/“Ende der Nachrichten”.

7. You will hear a waiting signal and have 10 seconds time to activate another

feature.

e.g. Press “0” to erase all messages. You will hear: “All messages erased”/“Alle

Nachrichten gelöscht”.

8. To end remote control, press “3” or hang up.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Topcom LUCCA Answering Machine User Manual Page 25

Comments to this Manuals

Related products and manuals for Answer phone Topcom LUCCA Answering Machine